manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 214

06

212

Driving

Operating fault

The system may suffer temporary 

interference in certain weather 

conditions (rain, hail...).
In particular, driving on a wet surface 
or moving from a dry area to a wet area 
can cause false alerts (for example, the 
presence of a fog of water droplets in 
the blind spot angle is interpreted as a 
vehicle).
In bad or wintry weather, ensure that 
the sensors are not covered by mud, 
ice or snow.
Take care not to cover the warning 
zone in the door mirrors or the 
detection zones on the front and rear 
bumpers with adhesive labels or other 
objects; they may hamper the correct 
operation of the system.

F

  To deactivate the system, press this button 

again; the warning lamp goes off.

The state of the system remains in memory on 
switching off the ignition.

The system is automatically 
deactivated when towing with a towbar 
approved by CITROËN.

In the event of a fault, the warning lamp in the 
button flashes then goes off.
Have it checked by a CITROËN dealer or a 
qualified workshop.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands