January 2001
5K - 11
Functions - Power Supply and Control
Service Manual Cafitesse 500
K.2.7 Disassembly of the rear LEDs
●
Remove the exhaust grid. (see pg. 5.G-5)
●
Pull the cable harness with the LEDs out of
the exaust grid.
●
Replace the defective LED.
Instructions for reinstallation:
The LED depends on the polarity.
The conductor with the larger conduc-
ting capacity is always the negative
pole. (Fig. 1)
Always plug the positive pole into the
socket labelled 1. (Fig. 1)
The LED will not light up and might be
damaged if it is installed wrongly.
K.2.8 Disassembly of cables
WARNING:
Make sure, that the dispenser is
disconnected from the power
supply and the water supply valve
is closed.
To disassemble separate cables from
Molex plugs only use the special Molex
service tool (2) (Fig. 2)
●
Press the service tool into the respective
opening of the plug (A, Fig. 2)
●
Remove the cable from the plug. (B, Fig. 2)
1
Fig. 1
Fig. 2
A
B
2
