January 2001
5 - 8
Functions
Service Manual Cafitesse 500
5.2 General Safety Instructions
Fig. 2
WARNING:
Make sure
-
that for all service work the
overflow hose (1) is
correctly installed in the
base strut (2). Two ribs of
the hose must protude from
the bottom (Fig. 1)
-
that the outlet hose (3) has
been put into the funnel in
the motor housing. (Fig. 1)
WARNING:
Carry out a functional test of
the dispenser when the work
is completed.
DANGER:
Glue a corresponding sticker
to the rating plate when the
heating capacity has been
changed. (see pg. 2-11)
WARNING:
When mounting the plugs
make sure that the catches (4)
engage with an audible click.
(Fig. 2)
Check the plugs for tight
fastening. Pull them briefly if
required.
DANGER:
Only replace cable harnesses
of the power circuit as a
complete original spare part.
Never repair the cable
harnesses (e.g. heating circuit).
There is the risk of fire.
WARNING:
For parts that may get in
contact with food use the
special lubricant Metaflux 70-
09 Biolub (Part no. K-0115).
WARNING:
Use the special Molex-service
tool (5) to remove single wires
from a Molex plug. (Fig. 3)
4
Fig. 1
3
1
2
Fig. 3
5
WARNING:
When mounting the front part
cable harness (BU 21/22), make
sure it is fastened to the
fastening device at the motor
housing.
