January 2001
4 - 9
Programming
Service Manual Cafitesse 500
Setting the clock of the service device
●
To switch the service device on, press
the activating button.
Display on the
Service Device 2
Service Device:
V1.4(15-04-88)
Clock
Press "Clock".
Display on the
Date(m-d):07-21
Service Device:
Time(h-m):03-12a
Input
Press "Input".
Display on the
Set day:21
Service Device:
- - - - - - - - - - - - - - - -
●
Enter the correct day via the keyboard.
Input
Press "Input".
Display on the
Set month:07
Service Device:
- - - - - - - - - - - - - - - -
Enter the correct month.
Input
Press "Input".
Display on the
Set hour:03a
Service Device:
- - - - - - - - - - - - - - - -
Enter the correct hour (e.g. 05).
Input
Press "Input".
Display on the
Set hour:05a
Service Device:
- - - - - - - - - - - - - - - -
(e.g. a = a.m. flashes)
↑
Press the Up button to change over to p
(pm) or a (am).
Input
Press "Input".
Display on the
Set minute:12
Service Device:
- - - - - - - - - - - - - - - -
●
Enter the correct minute.
Input
Press "Input" repeatedly to check or
correct the data.
●
The enterd data are consecutively
displayed.
Clock
Press "Clock" to store the data and to
switch the service device off.
Calling up the date and the time:
●
Press the activating button to switch the
service device on.
Clock
Press "Clock".
Display on the
Date(m-d):07-21
Service Device:
Time(h-m):03-11p
Clock
Press "Clock".
The service device is switched off.
General information
●
The service device must be equipped with
an E-EPROM, version 1.4 or higher.
●
If no button is pressed the service device
switches itself off after approx. 30 sec.
●
Instead of the display
Service Device 2
V1.4(15-04-88)
the following malfunction indications could
be displayed:
1)
Service Device 2
-Low battery-
Replace the battery with a new 9 V Alkaline
block battery.
CAUTION:
Observe all safety instructions
given at the beginning of this
chapter.
2)
Machine version=
??
