January 2001
4 - 31
Programming
Service Manual Cafitesse 500
Position neutral
Fig. 3
1
2
3 Position 2
1 2
3
4 Position 2
4.2.11
Programming the Energy Saving Program
Fig. 1
Fig. 2
During the energy saving program the
heating of the boiler is switched off (e.
g. during longer idle periods).
The cooling system remains on.
Keep in mind that the boiler needs a
certain time for heating up after the
energy saving program has ended.
●
The water cock must remain open.
●
Turn the key switch to position 2.
●
Press the 'mode' button (1) until the display
shows "EN S". After 1 sec. the beginning of
the energy saving program is displayed.
(Fig. 1)
To change the adjustment:
Press button (2) = + or (3) = -
●
Press the 'mode' button (1) and "EN E" will
be displayed.
After 1 sec. the end of the energy saving
program is displayed. (Fig. 2)
To change the adjustment:
Press button (2) = + or (3) = -
●
To finish programming, turn the key switch
to the neutral position and remove it.
●
Press the ON/OFF (4) switch to stop the
energy saving program for one period. In
this case the delivery of beverages will not
be interrupted. (Fig. 2)
●
As long as the energy saving program is
running the display shows "E-OFF".
(Fig. 3)
●
When the period for the energy saving
program is over the dispenser is switched
on automatically.
The display shows: "ON", resp. "PAY" or
"FREE".
●
If the ON/OFF button has been set to OFF
during the energy saving program, the
dispenser is not switched on automatically.
The display shows: "OFF".
