January 2001
5A - 17
Functions - Water System
Service Manual Cafitesse 500
Fig. 2
3
Fig. 3
Fig. 4
approx. 13mm
approx. 9mm
Outlet elbow for
hot water valve
Outlet elbow for
product valve
●
Pull the hot water pipe (3) off the solenoid
valve. (Fig. 2)
●
Disconnect the electrical connections from
the solenoid valve.
DANGER:
There is a risk of being burnt
and of short circuits, because
there is still some hot water
left in the pipe bends.
Solenoid valve for upper position:
short valve ventilation hose
Solenoid valve for bottom position:
long valve ventilation hose
On installation of the outlet elbow (4,
Fig. 2), ensure that the corrosion-
resistant washer (5) is placed on the
outlet elbow with the outer sharp edges
pointing upwards (see Fig. 3).
Also ensure that, for the hot water
valve, the right-angled outlet hose is
installed with an inner diameter of
approx. 9mm on the delivery side
(Fig. 4).
For the product valve, the obtuse-
angled outlet hose must be installed
with an inner diameter of approx.
13mm on the delivery side (Fig. 4).
4
Outlet elbow for
hot water valve
Outlet elbow for
product valve
5
