Administration Manual ip500pbxw – English
124
Outgoing VoIP Calls
In normal operation to make an outgoing call a line access code, 0 or 8, is dialled or a Line key is selected and the digits are
dialled. To make a call over an IP line the digit 8 must be dialled or an IP Line key selected.
This feature is used to program the system so that outgoing calls are sent over the IP Lines independently of the line
access code dialled or the line selected. It is also possible to select particular calls to go over IP lines.
1.
From the Programming Station, press
2.
Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.
Enter the System Programming Password and select
Lines
4. Select
Outgoing
VoIP
Calls
5.
Four options are displayed
•
Normal Line selection
•
All O/G Calls on VoIP
•
Selected Calls on VoIP
•
LCR
Normal line selection
This is the normal mode of operation where calls are made on a standard line by dialling 0 and on a VoIP line by dialling 0.
All O/G calls on VoIP
When this option is selected all Outgoing calls will be sent over a VoIP line. If you want calls to be dialled over a standard
line if the IP lines are busy then select ‘Fallback to PSTN Line’ which is displayed when ‘All O/G calls on VoIP’ is selected.
If you only want calls to be dialled over the IP lines and busy tone to be returned if they are not available make sure that the
‘Fallback to PSTN line’ option is not selected.
Selected Calls on VoIP
You can choose that particular calls be carried over the IP line. For example you may want all international calls to
automatically select an IP line but all other calls to go over the Line selected.
In this case choose ‘Selected Calls on VoIP’.
Up to 50 codes each of 5 digits can be entered.
Enter a code (01-50). Enter the digits e.g. 00 for international calls. Press Confirm. The option to fallback to a PSTN line is
automatically selected. If this is required press Exit to return to the Index page. If fallback is not wanted for this code, select
‘Fallback to PSTN line’ and return to the Index page.
LCR (Least Cost Routing)
To set up the feature you associate dialled digits (Input Codes) with the lines over which calls should be routed and with
whatever network codes (Output codes) are necessary to route the call.
In addition, you may choose to route the calls over different lines at various times of the day for optimum call rates.
The feature can be turned on permanently or activated at particular times.
Once the facility is activated, calls are automatically routed over the selected lines, and the network code (Output Code) is
dialled automatically on the line before the telephone number.
- Select
LCR
- Select
LCR
On
-
Up to 50 LCR rules may be defined (Index 01-50).
-
Enter an Index number (01-50)
-
Enter the input code and press confirm
- In
the
Input
Code
field you insert the relevant dialled digits (e.g. ‘00’ for International calls or ‘001’ for International
calls to the USA).
-
Enter the Output code (up to 9 digits) and press confirm.
