Doro IP500PBXW Owner'S Manual Download Page 69

Page: 69 / 166

Administration Manual ip500pbxw – English

Enable/Disable

The DHCP server is enabled by default. It can be disabled if required. Select

Disable

to disable DHCP.

DHCP Server Interfaces

By default the DHCP server operates on the iplan interfaces.

There is an option to delete DHCP on each interface. The DHCP Server must be disabled before an Interface can be
deleted.

Add new interface

There is an option to tell the DHCP server to operate on the ipdmz interface as well as the iplan.

Existing DHCP Server Subnets

The settings for the existing subnets on the iplan and ipdmz are displayed.

All displayed parameters can be changed – change the setting to a new value and click ‘Apply’.

To delete a subnet, check the associated box and select

Apply

Advanced Options

Select ‘Advanced Options’

The following screen is displayed

Summary of Contents for IP500PBXW







































































































































































Search results

Summary of Contents for IP500PBXW

Reviews:

Related manuals for IP500PBXW

Brands by name

Popular brands

Doro IP500PBXW, Owner'S Manual

Search results

Summary of Contents for IP500PBXW

Reviews:

Related manuals for IP500PBXW

Brands by name

Popular brands