Administration Manual ip500pbxw – English
18
Attaching the ip520c phone desk plinth
The desk plinth allows you to mount the ip520c phone at two angles.
Wall-mounting a ip520c phone
The phone plinth is inverted on the base to wall mount the phone.
Locate, drill and plug the 2 screw locations as shown below. The holes should be deep enough to accept a 2.5 cm screw.
Insert the two screws leaving sufficient space to clip the base over them. Locate the phone and base over the screws.
Wall hook when the
featurephone is in a 20
degrees or 35 degrees
Wall hook when the
featurephone is wall
mounted.
Wall mount Plinth position
Plinth position 20
°
Plinth position 35
°
6 inches
Line cord rails
152mm
