Doro IP500PBXW, Owner'S Manual

Page: 132 / 166

Administration Manual ip500pbxw – English
131
2. Press the Scroll Down key ( Ô ) until
System programming
is displayed and select.
3. Enter the System Programming Password and select
Stations
.
4. Select
Remote Notification
.
5. Select the stations that are to be allowed to use remote notification.
Selecting the Number of Simultaneous Calls
The number of simultaneous remote notification calls can be set at 1 or 2.
1.From the Programming station, press .
2.Press the Scroll Down key (
Ô
) until
System programming
is displayed and select.
3.Enter the System Programming Password and select
System
.
4.Select
Remote Notification
.
5.Select
Simultaneous Calls
.
6.Enter the value 1 or 2 and press
Confirm
.
The default value is set at 1.
Selecting the Number of Retry Attempts
The number of simultaneous remote notification calls can be set at 1 or 2.
1. From the Programming station, press .
2. Press the Scroll Down key ( Ô ) until
System programming
is displayed and select.
3. Enter the System Programming Password and select
System
.
4. Select
Remote Notification
.
5. Select
Retry attempts
.
6. Enter the value from 2 to 15 and press
Confirm
.
The default value is set at 2.
Selecting the Line Group that the Remote Notification calls are to use
The outgoing line group to be used for remote notification calls can be changed.
1. From the Programming station, press .
2. Press the Scroll Down key ( Ô ) until
System programming
is displayed and select.
3. Enter the System Programming Password and select
System
.
4. Select
Remote Notification
.
5. Select
Outgoing group
.
6. Select the group.
Notification delay timer
The time interval between receiving a message and making the first remote notification attempt is programmable. This is
set at 15 minutes (900 seconds) in default and can be set between 1 and 30 minutes (60 - 1800 seconds).
1. From the Programming station, press .
2. Press the Scroll Down key ( Ô ) until
System programming
is displayed and select.
3. Enter the System Programming Password and select
System
.
4. Select
Timers
.
5. Select
Notification Delay
.
6. Enter the value between 60 and 1800 seconds and press
Confirm
.