Administration Manual ip500pbxw – English
134
Programming Additional System Options
Door station
To set up a Door Station on your System
1.
From the Programming Station, press
.
2.
Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.
Enter the System Programming Password and select
System.
4. Select
Door
Station
.
5. Select
Door
Station
equipped
.
Press the Hands-free Key to finish programming.
To program which stations can operate the Doorstrike
1.From the Programming Station, press
.
2.Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.Enter the System Programming Password and select
Stations.
4.Press the Scroll Down Key (
Ô
) until
Open
door
restriction
is displayed and select.
5.Select which stations are restricted from opening the door. The stations restricted from operating the Doorstrike will be
indicated with a
♦
.
Press the Hands-free Key to finish programming.
External Diversion Options
This allows you to decide if External callers or External and internal Callers to your station are diverted externally if you have
set an external diversion. It also allows stations to be prohibited from activating an external diversion.
1.
From the Programming Station, press
.
2.
Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.
Enter the System Programming Password and select
Stations
.
4.
Press the Scroll Down Key (
Ô
) until
External
diversion
is displayed and select.
5. Select
No
trunk
to
trunk
calls
.
6.
Select the stations that are not allowed to activate an external diversion or set up trunk to trunk calls.
If both internal and external calls are to be diverted select 'All calls'.
If external calls only are to be diverted select 'External calls only'
Miscellaneous system configuration options
To change the Programming Station
System programming can only be carried out at one ip520c, that is, the ip520c connected to the Programming Station. By
default, station 20 is the Programming Station. The Programming Station can be changed to any other station if required.
1.
From the Programming Station, press
.
2.
Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.
Enter the System Programming Password and select
System
.
4. Select
Programming
position
.
5.
Select the station you wish to have as the Programming Station. The selected Programming Station is denoted
by a
♦
.
Press the Hands-free Key to finish programming.
To change the System Programming Password
The default System Programming Password (1111) can be changed to any 4-digit number.
1.
From the Programming Station, press
.
2.
Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
