Administration Manual ip500pbxw – English
120
Once the system has been restarted you should restore the database if you have saved it as shown above.
System Resets
This page allows you to reset your ip500pbxw to its default factory settings.
The configuration settings of your ip500pbxw are stored in a configuration file. When you set up your ip500pbxw and
access the web pages for the very first time, the configuration file contains a default factory configuration. This configuration
has been set by your provider for you, and contains the basic settings that you can use without having to make extensive
changes to the configuration.
If you do make changes to the default configuration but then wish to revert back to the original factory configuration, you can
do so by resetting the ip500pbxw to factory defaults.
You may need to reset to defaults if you have made changes to ip500pbxw's settings causing it not to function properly.
If you are having problems connecting to your Internet Service Provider, their support staff may request that you reset to
defaults to help in the connection process.
Remember that all your previous settings will be replaced.
Resetting the system
1.
From the left-hand menu, click on
Reset
Options
The following page is displayed:
Two options are presented, Reset and Reset to Defaults. Selecting
Reset
invokes a reset but all the programming is
retained. Resetting to defaults deletes most of the system programming.
Note
If you reset your ip500pbxw to factory defaults, all previous
configuration changes that you have made are overwritten by the
factory default configuration.
This page reminds you that resetting to factory defaults cannot be undone – any changes that you have made to the basic
settings will be replaced. If this is correct, click in the
Confirm
box to tick it, then click
Reset
to
Defaults
. The
following page is displayed:
This page confirms that the system is currently resetting to factory defaults. Once the reset is complete, Restart page is
displayed.
