Administration Manual ip500pbxw – English
101
Wireless Network General Settings
The
General
Settings
section of the
Wireless
Network
page displays details of the systems current wireless
configuration. For example:
The hyperlinks in this section allow you to:
-
Enable/disable wireless networking; see page 94.
-
Change the channel currently in use; click Change your wireless channel here… and follow the instructions in Select
a Channel on page 97.
-
Change the network name (SSID); click
Change
your
wireless
network
name
here
and follow the
instructions on page 94.
-
Configure wireless security; click Change Wireless Security settings here… and follow the instruction on page 95.
1.
Configure address authentication; click
Change
which
wireless
PCs
are
allowed
to
connect
here…
and follow the instructions in Configure Wireless Address Authentication on page 97.
display information about the wireless PCs connected to the system; see Displaying details of Wireless PCs on page
101.
Displaying details of Wireless PCs
At the
Wireless
Network
page, click on
View
details
of
connected
wireless
PCs…
The following page is
displayed:
This page displays the MAC address of the PC currently connected to your system, together with the signal strength. The
signal strength is the measure of radio frequency (RF) energy detected by the system on a specific channel. Signal strength
may vary depending on the position of the PC(s) in relation to the system.
To return to Wireless Network page, click on Return to the wireless status page.
