Administration Manual ip500pbxw – English
19
Power Fail Telephone
Connect a standard analogue telephone to the Power Fail connector. When the System is switched off the first analogue
line (Line 1) is switched through to this phone and you can make and receive calls on it until the power is restored.
4 Basic programming using the Management Application
The System includes a series of Web management pages that provide an interface to the software installed on the system.
It enables you to configure the system by accessing the Management application through your web browser from any PC
connected to the system via
the wired or wireless LAN.
Note
By default the Wireless network card in the ip500pbxw is
disabled. This is as a security measure to prevent unauthorised
access to the system. To turn the Wireless network on, see Page
94.
Open a Web Browser such as Internet Explorer or similar on the PC.
Go to the Management Application of your system by entering the following address into the web browser,
http://192.168.1.1
The following Log In screen is displayed
Enter your user name and password.
The first time you log into the program, use these defaults:
User Name:
admin
Password: admin
Note
You can change the password at any time or you can configure
your system so that you do not need to enter a password. See
Password on page 66
Click
OK
. The
Welcome
page is displayed:
