Administration Manual ip500pbxw – English
135
3.
Enter the System Programming Password and select
System
.
4. Select
Change
password
.
5. Select
Change
and enter the 4-digit number you require.
6. Select
Confirm
.
Press the Hands-free Key to finish programming.
To configure unequipped line interfaces
The system assumes that available line interfaces have exchange lines connected to them. If a line interface does not have
an exchange line connected ensure correct system operation by unequipping the line interface in system programming, as
follows:
1.
From the Programming Station, press
.
2.
Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.
Enter the System Programming Password and select
Lines
.
4.
Press the Scroll Down Key (
Ô
) until
Equipped
Lines
is displayed and select.
5.
Select the lines you wish to equip or unequip. Equipped lines are denoted by a
♦
. Unequipped lines are
denoted by a
◊
.
Press the Hands-free Key to finish programming.
To configure disconnected stations
The system assumes that all available station interfaces have telephones connected to them. If a station interface does not
have a telephone connected, ensure correct system operation by disconnecting the station interface in system
programming, as follows
1.
From the Programming station, press
.
2.
Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.
Enter the System Programming Password and select
Stations
.
4.
Press the Scroll Down Key (
Ô
) until
Station
disconnect
is displayed and select.
5.
Select the stations you wish to connect or disconnect. Disconnected stations are denoted by a
♦
.
Press the Hands-free Key to finish programming.
Note
When a ip520c is connected to a station interface that is
programmed as disconnected, the ip520c display may appear as
if the ip520c is connected. However, when the handset is lifted a
busy tone is heard and no options will be displayed.
To examine system passwords
1.From the Programming Station, press
.
2.Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.Enter the System Programming Password and select
Stations
.
4.Press the Scroll Down Key (
Ô
) until
Examine
passwords
is displayed and select.
5.Select either
Station
lock
password
, or
Voicemail
password
, or
System
VM
box
.
- If
you
selected
Station
lock
password
, the station menu will appear. Select a station and its station Lock
Password will appear on the display.
- If
you
selected
Voicemail
password
, the station menu will appear. Select a station and its Voicemail Password
will appear on the display.
- If
you
selected
Answering
machine
, the Answering machine Password appears on the display.
Press the Hands-free Key to finish programming.
To configure Line Key Lights
When a call is placed on System Hold, you can decide if the associated Line Key Light is to flash or remain steady on all
other ip520c phones. The default setting is that the light flashes.
