Administration Manual ip500pbxw – English
137
3.
Enter the System Programming Password and select
Lines.
4.
Press the Scroll Down Key (
Ô
) until
PSTN
Programming
is displayed and select.
5.
Select the desired option as detailed in the table below. The options are either explained in the following pages
or in the referenced pages
Press the Hands-free Key to finish programming.
CO Programming Option
Default setting
Alternate setting
CDS Detection
CDS not set
CDS set
Dialtone detection
Off
On
Long PSTN Line
Off
On
Programming CDS Detection
On standard PSTN Lines on the ip500pbxw the CDS option is provided. The system can then detect when CDS
information is being sent from the network and display the number.
1.
From the Programming Station, press
.
2.
Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.
Enter the System Programming Password and select
Lines
.
4.
Press the Scroll Down Key (
Ô
) until
PSTN
programming
is displayed and select.
5.
Press the Scroll Down Key (
Ô
) until
CDS
Detection
is displayed and select.
6.
The lines with CDS Detection programmed are indicated with a
♦
.
Programming Dialtone Detection
This feature is provided as a programmable option under CO programming and is enabled to prevent the system from
dropping the line when dial tone has not been detected. When enabled dial tone is not detected and the line is released if
no digit is dialled until the expiration of the Dialling time-out timer
1.
From the Programming Station, press
.
2.
Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.
Enter the System Programming Password and select
Lines
.
4.
Press the Scroll Down Key (
Ô
) until
PSTN
programming
is displayed and select.
5.
Press the Scroll Down Key (
Ô
) until
Dialtone
detection
is displayed and select.
6.
The lines with ' Dialtone detection' enabled are indicated with a
♦
.
Button Hopping
When Button hopping is enabled if you press a second line key while on a call on another line the first call is
disconnected. With button hopping off the first call is placed on hold when the second line key is pressed.
1.
From the Programming Station, press
.
2.
Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.
Enter the System Programming Password and select
System
.
4.
Press the Scroll Down Key (
Ô
) until
Button
Hopping
is displayed and select.
5.
Select ‘Button hopping On or Off’ as required.
To set system timers
You can set various timers from the Programming Station to suit your requirements.
1.
From the Programming Station, press
.
2.
Press the Scroll Down Key (
Ô
) until
System
programming
is displayed and select.
3.
Enter the System Programming Password and select
System
.
4.
Press the Scroll Down Key (
Ô
) until
Timers
is displayed and select.