Doro IP500PBXW Owner'S Manual Download Page 8

Page: 8 / 166

Administration Manual ip500pbxw – English

Using this Document

Notational conventions

Acronyms are defined the first time they appear in the text and also in the glossary.

The term LAN refers to a group of Ethernet-connected computers at one site.

The term WLAN refers to a group of Wireless-connected computers at one site.

Typographical conventions

Display

text

is used for items you select from menus and drop-down lists and the names of displayed web pages.

Bold text

is used for text strings that you type when prompted by the program, and to emphasise important points.

Special messages

This document uses the following icons to draw your attention to specific instructions or explanations.

Note

Provides clarifying or non-essential information on the current topic.

Definition

Explains terms or acronyms that may be unfamiliar to many
readers. These terms are also included in the Glossary.

WARNING

Provides messages of high importance, including messages
relating to personal safety or system integrity.

Summary of Contents for IP500PBXW







































































































































































Search results

Summary of Contents for IP500PBXW

Reviews:

Related manuals for IP500PBXW

Brands by name

Popular brands

Doro IP500PBXW, Owner'S Manual

Search results

Summary of Contents for IP500PBXW

Reviews:

Related manuals for IP500PBXW

Brands by name

Popular brands