Administration Manual ip500pbxw – English
100
Setting the Country
1. From
the
First
Time
Settings
section of the
Wireless
Network
page, click
Change
your
wireless
first
time
settings
here…
The first page of the wizard is displayed:
The number of valid wireless network frequencies varies from country to country and you need to identify which country
you are operating the system in to ensure that your network will transmit on the correct frequency. The setting for Ireland
is the default setting so you do not need to change it.
From the
Country
drop-down list, select the appropriate country. Click on the
Confirm
Changes>
button to apply
configuration changes and move on to the next page in the wizard sequence, which allows you to
Select
your
Wireless
Network
Type
.
Select your Wireless Network Type
The following page allows you to select the Institute of Electrical and Electronics Engineers (IEEE) specification supported
by your network:
Each specification transmits at a certain speed (measured in Mbits per second) over a specific frequency. The frequency
indicates the range at which wireless traffic can be transmitted or received between the system and the wireless PC(s).
Supported specifications are:
-
802.11B only – provides slower rates at a longer range than 802.11G (11 Mbps in the 2.4 GHz band)
-
802.11G only – provides faster rates at a shorter range than 802.11B (20+ Mbps in the 2.4 GHz band)
-
802.11B/G – supports both of the above specifications, but 802.11G rates will be slower than they are in a G-only
network
To select a network type, click on a single radio button.
Click on the
Confirm
Changes>
button to apply the configuration changes.
