Administration Manual ip500pbxw – English
36
ip520c– Basic Call Features
Making and Answering Calls
Making an external call.
There are two basic modes of operation available for making external calls. In the normal mode, which is the default, a line
access digit (0 or 8) is dialled to select a Line.
If Automatic Line selection is programmed you do not enter the line access code. See page 75 for Automatic line selection
from a ip520c and page 123 for programming via the web management interface.
Making an external call in normal mode
•
Press a Line Key to select a free line and when dial tone is returned dial the external number.
•
Dial 0, (to select a normal line. When dial tone is returned dial the external number.
•
Dial 8 to select a VoIP line. When dial tone is returned dial the external number.
Making an external call with Automatic Line selection programmed
•
Press a Line Key to select a free line and when dial tone is returned dial the external number.
OR
•
Lift the handset, or use a Hands-free Key, and dial the number. The system automatically selects a free line and the
number is dialled.
Making an external call in Pre-dial mode
If you do not lift the handset you may enter digits in Pre-dial mode by dialling 0 or 8 followed by the external number in
normal mode or dial the external number when Automatic Line selection is programmed. Digits will not be sent to line until
you lift the handset, press the Hands-free key, or select 'Dial' from the display.
You can edit the number you have entered prior to sending to the line, by using the left-hand Keypad ‘Edit Key’, located
below the keypad.
To make an internal call in normal mode
You can place an internal call in one of the following ways:
•
Select the ‘Internal Call’ option on the display and select the desired station from the list
•
Dial the station number (20 – 23 or 31-34) and select 'Dial'.
•
Lift the handset and dial the station number.
The display will show the station number, or, if programmed, the station’s name.
To make an internal call with Automatic Line selection programmed
Select the ‘Internal Call’ option on the display and select the desired station from the list.
The display will show the station number, or, if programmed, the station’s name.
