Administration Manual ip500pbxw – English
87
The following page is displayed: -
Enter the codes for the particular calls. For all international calls to be carried over the IP trunk enter 00 in Index 1.
If you want calls to be dialled over Line 1 if the IP lines are busy then select
Fallback
to
PSTN
Line
.
If you only want calls to be dialled over the IP lines and busy tone to be returned if they are not available make sure that the
Fallback
to
PSTN
line
box is not selected. Click
Apply
.
Least Cost Routing
To set up the feature you associate dialled digits (Input Codes) with the lines over which calls should be routed and with
whatever network codes (Output codes) are necessary to route the call.
In addition, you may choose to route the calls over different lines at various times of the day for optimum call rates.
The feature can be turned on permanently or activated at particular times.
Once the facility is activated, calls are automatically routed over the selected lines, and the network code (Output Code) is
dialled automatically on the line before the telephone number.
Using this page you may define the Least Cost Routing criteria.
Up to 30 LCR rules may be defined (Index 1 – 30).
In the ‘Input Code’ field you insert the relevant dialled digits (e.g. ‘00’ for International calls or ‘001’ for International calls to
the USA).
In the Output Code field, you insert whatever digits you want to be passed to the network. If no additional carrier access
codes are required, then the Output Code would typically match the Input Code.
