DeLorme Street Atlas USA 2009, User Manual

Page: 355 / 405

Using Street Atlas Handheld on a PDA
343
• If your coordinates are in the UTM/UPS system, and you change the easting and
northing numbers to values not found in the current zone, the zone number and easting
and northing values update to the correct zone, which displays in the Coords
information area in the GPS Settings screen.
GPS Logging on a Pocket PC Device
Connect a GPS receiver to your handheld and log your GPS session in Street Atlas US®
Handheld.
To Log a GPS Session
Use the following steps to set up and start logging your GPS session.
1. Tap GPS and then tap Logging. The GPS Logging screen displays.
• To start logging when you start your GPS, tap to select the Log at GPS
Connect check box.
• To change the interval (in seconds) when points in the log are recorded, tap
the down arrow next to Interval and then tap 2, 4, or 8 secs.
• To sound an alarm when system memory is low, tap to select the Warn low
memory check box.
The Memory bar displays used, free, and total memory on your handheld.
2. Tap Start Log to begin logging.
Note Tap Stop Log to finish logging.
3. Tap ok to exit the GPS Logging screen.
The map view screen displays.
Viewing a GPS Log on the Map on a Pocket PC Device
Once you have created a GPS log in Street Atlas USA
®
Handheld, you can view the log on
the map view screen.
To View a GPS Log
Use the following steps to view GPS logs you have created on a map.
1. Tap Data and then tap GPS Logs.
The Data screen displays the list of GPS log files available on your Pocket PC.
2. From the list of log files, tap the name of the log you want to view.
The log name is highlighted.
Note Only one GPS log can be displayed on the map at a time.
3. Tap Go To. The map view displays the start point of the selected GPS log at map
center.
Note You cannot view a log file that is actively being logged. An hourglass symbol indicates
the GPS log is a large file and may take longer to view on the screen.