DeLorme Street Atlas USA 2009, User Manual

Page: 192 / 405

Street Atlas USA® 2009 User Guide
180
ƒ
Type new coordinates and click Apply to move circles, symbols, text,
and MapNotes. The whole object moves to the entered location. If you
change the distance and bearing numbers, the object moves in
relationship to the object's last location.
ƒ
Type new coordinates and click Apply to move individual end points
(small red circles) in line segments in routable roads, lines, splines,
polygons, rectangles, and arcs. If you change the distance and bearing
numbers of the individual points (not recommended for rectangles), the
end point's distance and bearing/angle change in relationship to the
start point of the segment.
Renaming a Draw Object
Once you create a draw object, you can rename it in the draw file list or on the map.
To Rename a Draw Object in the File List
Note This option is available only with regular Street Atlas USA with Advanced File
Management or Street Atlas USA Plus.
Use the following steps to rename a draw object in the file list.
1. Click the Draw tab.
2. Click File to open the draw file editing area.
All the files you have created display in a table. Any draw file with a selected
check box displays on the map.
3. Click to select the file that includes the draw object you want to rename.
4. Click More.
The tab area increases in height and the file details table displays. The
information that displays in the table is dependent on the file type that is
selected.
5. Right-click the draw object and select Rename.
OR
Click within the file name cell once. Then, click it again (do not double click).
6. The file name area activates. Type the file name and press the ENTER key on
your keyboard.
To Rename a Draw Object on the Map
Use the following steps to rename a draw object on the map.
1. Open the map file that contains the draw object you want to rename.
2. Right-click the waypoint, point to Manage Draw and click Edit Draw Object
Text. The waypoint text box opens.
Note If you have more than one waypoint close together, you may have to
select from a list.
OR
Click the Select tool , click the waypoint, and click the waypoint again
(do not double-click). The waypoint text box opens.