Dell PowerConnect W-AirWave 7.6 User Manual Download Page 249

Page: 249 / 332

Figure 162:

Reports > Definitions

Page Illustration (Split View)

Figure 163:

Report Type

Drop down Menu in

Reports > Definitions

Illustration

NOTE: Only

admin

users have complete access to all report information. The AirWave reports and online displays of information can

vary with configuration, User Roles, and Folders.

Reports > Generated Page Overview

The

Reports > Generated

page displays reports that have been run, as well as the most recent daily version of any

report. An

Admin

user can see and edit all report definitions in AirWave. Users with

Monitor Only

roles can see

reports and definitions only if they have access to all devices in the reports.

The

Reports > Generated

page contains three primary sections, as follows:

Generated reports configured for the current role and for additional roles

Generated reports for other roles

The latest daily reports for immediate online viewing

Dell PowerConnect W-AirWave 7.6 | User Guide

Creating, Running, and Emailing Reports | 237

Summary of Contents for PowerConnect W-AirWave 7.6













































































































































































































































































































































Search results

Summary of Contents for PowerConnect W-AirWave 7.6

Reviews:

Related manuals for PowerConnect W-AirWave 7.6

Brands by name

Popular brands

Dell PowerConnect W-AirWave 7.6, User Manual

Search results

Summary of Contents for PowerConnect W-AirWave 7.6

Reviews:

Related manuals for PowerConnect W-AirWave 7.6

Brands by name

Popular brands