Dell PowerConnect W-AirWave 7.6 User Manual Download Page 234

Page: 234 / 332

222 | Performing Daily Administration in AirWave

Dell PowerConnect W-AirWave 7.6 | User Guide

1. Enter the keyword or text with which to search. If searching for a MAC address, enter it in colon-delimited

format.

2. Press Enter to perform a default search, or select a different search method from the list of drop-down options.

The results display after a short moment. Results support several hypertext links to additional pages, and the

Filter

icon over some columns allow for additional filtering of search returns.

Search results are categorized in the following sequence. Categories of search results can be customized on the

Home > User Info

page to limit the scope of information returned. Not all categories below are returned for a

given search:

Devices

Clients

VPN Users

Rogues and Rogue Clients

Summary of Contents for PowerConnect W-AirWave 7.6













































































































































































































































































































































Search results

Summary of Contents for PowerConnect W-AirWave 7.6

Reviews:

Related manuals for PowerConnect W-AirWave 7.6

Brands by name

Popular brands

Dell PowerConnect W-AirWave 7.6, User Manual

Search results

Summary of Contents for PowerConnect W-AirWave 7.6

Reviews:

Related manuals for PowerConnect W-AirWave 7.6

Brands by name

Popular brands