Dell PowerConnect W-AirWave 7.6, User Manual

Page: 161 / 332

level override for its referenced Spectrum profile, as illustrated in Figure 111 . This will affect all Spectrum-supported
APs managed by this controller.
Figure 111:
Override Section of a Supported Controller’s Manage Page
Perform these steps to override individual profile settings for an Dell PowerConnect W-Seriescontroller that is part
of a spectrum-mode Dell PowerConnect W AP group:
1. Select a Spectrum-supported Dell PowerConnect W-Seriescontroller that is referencing a Spectrum profile, and go
to its APs/Devices > Manage page. Set it to Manage Read/Write mode.
2. Under the Dell PowerConnect WOverrides section, select Add New Dell PowerConnect WController
Override .
3. In the Profile drop-down menu, select the Spectrum Profile type.
4. In the Profile Instance drop-down menu, select the instance of the Spectrum profile used by the controller.
5. In the Field drop-down menu, select the setting you would like to change (such as an Age-Out setting or a
Spectrum Band), and enter the overriding value below it.
6. Select Add to save your changes.
7. To create additional overrides for this controller, select Add New Dell PowerConnect W Controller Override
again.
8. When you have finished, select Save and Apply .
You can also use the above procedure to turn on Spectrum mode for radio profiles on one particular controller, or use
the overrides to point your radio profile to a non-default Spectrum profile for just this controller.
Dell PowerConnect W-AirWave 7.6 | User Guide Discovering, Adding, and Managing Devices | 149