Figure 218:
WLC RRM Configuration in AirWave
l
Review the values in the
Monitor Intervals
section. These should be configured to a recommended setting of
180
for better accuracy.
Deploying APs for Client Location Accuracy
Deploying access points for client location accuracy can be different than deploying access points for capacity.
Follow these guidelines for best results:
l
Ensure that at least 3 radios can hear each client devices at -85 dBm or below
l
Ensure that you deploy an access point approximately every 3,500 square feet.
l
For square or rectangular floor plans ensure access points are deployed on the exterior walls of each floor with
access points in the middle as well.
Refer to
Figure 219
for an example.
Figure 219:
Rectangular Floor Plan AP Deployment
Dell PowerConnect W-AirWave 7.6 | User Guide
Using VisualRF | 289
Summary of Contents for PowerConnect W-AirWave 7.6
