AMP Health
Trigger
Description
Disk Usage
This trigger type is based on the disk usage of AirWave. This type of trigger indicates that disk usage for
the AirWave server has met or surpassed a defined threshold. Select
Add New Trigger Condition
to
specify the disk usage characteristics that trigger an alert.
Set one of these triggers at
90%
so you receive a warning before AirWave suffers performance
degradation due to lack of disk space.
Table 112:
Disk Usage Trigger and Condition Settings
b. Repeat this procedure for as many triggers and conditions as desired. Refer to the start of
"Creating New
Triggers" on page 191
to create a new trigger.
Delivering Triggered Alerts
AirWave uses Postfix to deliver alerts and reports via email because it provides a high level of security and queues
email locally until delivery. If AirWave is located behind a firewall, preventing it from sending email directly to a
specified recipient, use the following procedures to forward email to a smarthost.
1. Add the following line to /etc/postfix/main.cf:
relayhost =
[mail.example.com]
where mail.example.com is the IP address or hostname of your smarthost
2. Run
service postfix restart
.
3. Send a test message to an email address:
Mail -v [email protected]
Subject: test mail
.
CC:
4. Press
Enter
.
5. Check the mail log to ensure mail was sent:
tail -f /var/log/maillog
Viewing Alerts
Apart from visiting
System > Alerts
, AirWave displays alerts and provides alert details in two additional ways:
1. The
Alert Summary
table is available on the following AirWave pages, and is illustrated in
Figure 132
:
l
APs/Devices > List
l
Groups > Monitor
l
Home > Overview
l
Clients > Connected or Client Detail
Figure 132:
Alert Summary
Table Illustration
This table displays alerts as follows; select the alert
Type
to display alert details:
l
AirWave Alerts
—Displays details for all device alerts.
Dell PowerConnect W-AirWave 7.6 | User Guide
Performing Daily Administration in AirWave | 199
Summary of Contents for PowerConnect W-AirWave 7.6
