Dell PowerConnect W-AirWave 7.6 User Manual Download Page 219

Page: 219 / 332

Field

Description

Repair Guest User
Errors

Sets AirWave to attempt to push the guest user again in an attempt to repair any errors in the

Status

column.

Add New Guest User

Adds a new guest user to a controller via AirWave.

Username

Randomly generates a user name for privacy protection. This name appears on the

Guest User

detail

page.

Name

Displays the specified guest user name.

Enabled

Enables or disables the user status. Set the status of the guest user as active (enabled) or expired
(disabled).

Displays the optional email address of the user.

Company Name

Displays the optional company name for the user.

Sponsor Name

Displays the name of the sponsor for the guest user. This setting is optional.

Expiration

Displays the date the guest user's access is to expire.

WLAN Profile

Sets the SSID that the guest user can access. This setting applies to Cisco WLC only.

Status

Reports current status by the controller. If error messages appear in this column, select the user
with the checkbox at left, and select the

Repair guest user errors

button.

Table 116:

Clients > Guest Users Fields

Guest users associated to the wireless network appear on the same list as other wireless users, but are identified
as guest users in the

Guest User

column. The

Client Detail

page for a guest user also contains a box with the

same guest information that appears for each user on the

Clients > Guest Users

list.

NOTE: The

Enabled, Sponsor Name, WLAN Profile, and Status

columns can be filtered using the funnel icon

(

5. To add a new guest user, select

Add

, and complete the fields illustrated in

Figure 139

Table 116

above describes

most fields. The first three fields are required, and the remaining fields are optional.

Dell PowerConnect W-AirWave 7.6 | User Guide

Performing Daily Administration in AirWave | 207

Summary of Contents for PowerConnect W-AirWave 7.6













































































































































































































































































































































Search results

Summary of Contents for PowerConnect W-AirWave 7.6

Reviews:

Related manuals for PowerConnect W-AirWave 7.6

Brands by name

Popular brands

Dell PowerConnect W-AirWave 7.6, User Manual

Search results

Summary of Contents for PowerConnect W-AirWave 7.6

Reviews:

Related manuals for PowerConnect W-AirWave 7.6

Brands by name

Popular brands