Dell PowerConnect W-AirWave 7.6 User Manual Download Page 217

Page: 217 / 332

Monitoring Rogue Clients With the Clients > Rogue Clients Page

You can view connected rogue clients in AirWave by selecting the

Clients > Rogue Clients

page. In this page, you

can click on the MAC address of a rogue to view the Client Details page or on a Rogue AP link to view the

RAPIDS

> Details

page for the AP.

Figure 136

illustrates the

Clients > Rogue Clients

page.

Figure 136:

Clients > Rogue Clients

Page Illustration

Table 115

describes the fields on this page.

Field

Description

MAC Address

Displays the MAC address of the rogue client. Click on this to jump to the

Clients > Client Detail

page

for this rogue.

Username

The username associated with this client.

Rogue AP

The name of the Rogue AP. Click on this to jump to the

RAPIDS > Detail

page for this AP.

Device Type

The type of device, such as iPhone, Windows 7, etc.

SSID

The SSID of this client.

BSSID

The BSSID of this client.

First Heard

The date and time when this rogue client was first noticed.

Last Heard

The date and time when this rogue client was last noticed.

Location

If a location is available, you can click on this link to open the VisualRF floor plan and location on
which this client resides.

Connection Mode

Shows the type of connection, such as 802.11n, 802.11b, etc.

Ch BW

Shows the channel bandwidth for this rogue client.

Signal

Shows the signal value for this rogue client.

SNR

Shows the signal-to-noise ratio.

Channel

Shows the channel on which this rogue client is broadcasting.

Table 115:

Clients > Rogue Clients Fields

Dell PowerConnect W-AirWave 7.6 | User Guide

Performing Daily Administration in AirWave | 205

Summary of Contents for PowerConnect W-AirWave 7.6













































































































































































































































































































































Search results

Summary of Contents for PowerConnect W-AirWave 7.6

Reviews:

Related manuals for PowerConnect W-AirWave 7.6

Brands by name

Popular brands

Dell PowerConnect W-AirWave 7.6, User Manual

Search results

Summary of Contents for PowerConnect W-AirWave 7.6

Reviews:

Related manuals for PowerConnect W-AirWave 7.6

Brands by name

Popular brands