Dell PowerConnect W-AirWave 7.6 User Manual Download Page 101

Page: 101 / 332

Figure 57:

Groups > PTMP

Page Illustration

3. Define the settings on this page.

Table 64

describes the settings and default values.

Setting

Default

Description

802.11a Radio Channel

Selects the channel used for 802.11a radios by the devices in this
group.

802.11g Radio Channel

Selects the channel used for 802.11g radios by the devices in this
group.

Channel Bandwidth

Defines the channel bandwidth used by the devices in this group.

Network Name

Wireless Network

Sets the Network name, with a range of length supported from two to
32 alphanumeric characters.

Network Secret

None

Sets a shared password to authenticate clients to the network.

Table 64:

Groups > PTMP Fields and Default Values

4. Select

Save and Apply

when configurations are complete to make them permanent, or select

Save

to retain these

settings prior to pushing to controllers at a later time.

Configuring Proxim Mesh Radio Settings

1. Go to the

Groups > Proxim Mesh

configuration page to configure Mesh-specific radio settings.

2. Define the settings as required for your network.

Figure 58

illustrates this page. The tables that follow describe

the settings and default values.

Figure 58:

Groups > Proxim Mesh

Page Illustration

Dell PowerConnect W-AirWave 7.6 | User Guide

Configuring and Using Device Groups | 89

Summary of Contents for PowerConnect W-AirWave 7.6













































































































































































































































































































































Search results

Summary of Contents for PowerConnect W-AirWave 7.6

Reviews:

Related manuals for PowerConnect W-AirWave 7.6

Brands by name

Popular brands

Dell PowerConnect W-AirWave 7.6, User Manual

Search results

Summary of Contents for PowerConnect W-AirWave 7.6

Reviews:

Related manuals for PowerConnect W-AirWave 7.6

Brands by name

Popular brands