38 | Configuring AirWave
Dell PowerConnect W-AirWave 7.6 | User Guide
2. Select
No
to disable or
Yes
to enable authentication. If you select
Yes
, several new fields appear.
Complete the fields described in
Table 24
.
Field
Default
Description
Primary Server Hostname/IP
Address
N/A
Enter the IP address or the hostname of the primary server.
Primary Server Port (1-65535)
49
Enter the port for the primary server.
Primary Server Secret
N/A
Specify and confirm the primary shared secret for the primary
server.
Confirm Primary Server Secret
N/A
Re-enter the primary server secret.
Secondary Server Hostname/IP
Address
N/A
Enter the IP address or hostname of the secondary server.
Secondary Server Port (1-65535)
49
Enter the port for the secondary server.
Secondary Server Secret
N/A
Enter the shared secret for the secondary server.
Confirm Secondary Server Secret
N/A
Re-enter the secondary server secret.
Table 24:
AMP Setup > Authentication Fields and Default Values for Authentication
3. Select
Save
and continue with additional steps.
Configuring Cisco ACS to Work with AirWave
To configure Cisco ACS to work with AirWave, you must define a new service named
AMP
that uses https on the
ACS server.
1. The AMP https service is added to the
(Cisco) interface under the
Interface Configuration
tab.
2. Select a checkbox for a new service.
3. Enter AMP in the service column and
https
in the protocol column.
4. Select
Save
.
5. Edit the existing groups or users in TACACS to use the AMP service and define a role for the group or user.
n
The role defined on the
Group Setup
page in ACS must match the exact name of the role defined on the
AMP Setup > Roles
page.
n
The defined role should use the following format:
role=
<name_of_
AMP
_role>
. One example is as follows:
role=DormMonitoring
As with routers and switches, AMP does not need to know usernames.
6. AMP also needs to be configured as an AAA client.
n
On the
Network Configuration
page, select
Add Entry
.
n
Enter the IP address of AirWave as the
AAA Client IP Address
.
n
The secret should be the same value that was entered on the
AMP Setup >
page.
7. Select
(Cisco IOS) in the
Authenticate Using
drop down menu and select
restart
.
NOTE: AirWave checks the local username and password store before checking with the server. If the user is found locally,
the local password and local role apply. When using TACAS+, it is not necessary or recommended to define users on the AirWave
server. The only recommended user is the backup administrator, in the event that the TACAS+ server goes down.
Summary of Contents for PowerConnect W-AirWave 7.6
