Field
Description
SSID
Displays the SSID associated with the VLAN.
VLAN ID
Identifies the number of the primary VLAN SSID on which encrypted or unencrypted packets
can pass between the AP and the switch.
Name
Displays the name of the VLAN.
Encryption Mode
Displays the encryption on the VLAN.
First or Second Radio
Enabled
Enables the VLAN, SSID and Encryption Mode on the radio control.
First or Second Radio
Primary
Specifies which VLAN to be used as the primary VLAN. A primary VLAN is required.
NOTE:
If you create an open network (see the
Create Closed Network
setting below) in which
the APs broadcast an SSID, the primary SSID is broadcast.
Native VLAN
Sets this VLAN to be the native VLAN. Native VLANs are untagged and typically used for
management traffic only. AirWave requires a Native VLAN to be set. For AP types do not
require a native VLAN, create a dummy VLAN, disable it on both radio controls, and ensure that
it has the highest VLAN ID.
Table 54:
Groups > SSIDs Fields and Descriptions
3. Select
Add
to create a new SSID or VLAN, or select the pencil icon next to an existing SSID/VLAN to edit that
existing SSID or VLAN. The
Add SSID/VLAN
configuration page appears as illustrated in
Figure 43
and
explained in
Table 55
.
Figure 43:
Groups > SSIDs > Add SSID/VLAN
Page Illustration
4. Locate the
SSID/VLAN
section on the
Groups > SSIDs
configuration page and adjust these settings as
required. This section encompasses the basic VLAN configuration.
Table 55
describes the settings and default
values. Note that the displayed settings can vary.
Setting
Default
Description
Specify Interface Name
Yes
Enables or disables an interface name for the VLAN interface. Selecting
No
for this option displays the
Enable VLAN Tagging
and
VLAN ID
options.
Table 55:
Groups > SSIDs > SSID/VLAN Section Fields and Default Values
Dell PowerConnect W-AirWave 7.6 | User Guide
Configuring and Using Device Groups | 75
Summary of Contents for PowerConnect W-AirWave 7.6
