Dell PowerConnect W-AirWave 7.6, User Manual

Page: 119 / 332

Manually Adding Individual Devices
Some deployment situations may require that you manually add devices to AirWave. You can add devices manually
by uploading a CSV file, or from the
Device Setup > Add page.
This section describes the following procedures:
n
"Adding Devices with the Device Setup > Add Page" on page 107
n
"Adding Multiple Devices from a CSV File" on page 110
n
"Adding Universal Devices" on page 111
Adding Devices with the Device Setup > Add Page
Manually adding devices from the Device Setup > Add page to AirWave is an option for adding all device types.
You only need to select device vendor information from a drop down menu for Cisco and Dell PowerConnect W-
Series devices, and AirWave automatically finds and adds specific make and model information into its database.
Perform these steps to manually add devices to AirWave:
1. The first step to add a device manually is to select the vendor and model. Browse to the Device Setup > Add
page and select the vendor and model of the device to add. Figure 71 illustrates this page.
Figure 71:
Device Setup > Add Page Illustration
2. Select Add . The Device Communications and Location sections appear, illustrated in Figure 72 .
Dell PowerConnect W-AirWave 7.6 | User Guide Discovering, Adding, and Managing Devices | 107