4-20
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-05
Chapter 4 Troubleshooting the CTS 500
Managing Hardware Setup
The Microphone Troubleshooting screen displays the number of microphones available for testing:
•
CTS 500—1 microphone with a single audio meter displayed on a single test screen.
Testing Microphones
Go to the following sections to test microphones:
•
Testing Microphones on the CTS 500, page 4-20
•
Troubleshooting Microphones, page 4-21
•
Related Information, page 4-22
Testing Microphones on the CTS 500
To test microphones on the CTS 500, follow these steps:
Step 1
Log in to the Cisco TelePresence System Administration window.
Step 2
Choose Troubleshooting > Hardware Setup.
Step 3
Click the Microphones radio button.
Step 4
Click Start in the Testing box to begin the test. The Microphone Calibration button is activated.
Step 5
Lightly tap each microphone and watch the audio meter on the corresponding display screen to see that
sound registers.
Step 6
Click Stop to end the test.
