3-10
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-05
Chapter 3 Configuring the Cisco TelePresence System
Cisco Unified Communications Manager Settings
Administrative VLAN ID
The CTS must have a VLAN membership ID before it can proceed with a DHCP request for an IP
address.
To view or configure the administrative VLAN ID, follow these steps:
Step 1
Choose Configuration > Network Settings.
Step 2
Enter an administrative VLAN ID for Cisco TelePresence in this field.
Note
The Apply and Reset buttons become active when a value is entered in this field.
Step 3
Click Apply to register a new or modified setting.
Step 4
Click Reset to restore the administrative VLAN ID setting displayed when you opened this window.
Syslog Address
This field shows the display-only syslog address that is standard for networks with a Cisco Unified IP
phone.
Cisco Unified Communications Manager Settings
To specify TFTP server locations and view a list of available settings for this Cisco TelePresence system,
follow these steps:
Step 1
Choose Configuration > Cisco Unified Communications Manager Settings.
Step 2
Configure Cisco Unified CM Settings using the information in
Table 3-2
.
Table 3-2
Cisco Unified Communications Manager Settings
Field
Settings
Use Configuration TFTP Server
•
Click Automatic to set the default condition, which is that the
TFTP server will reply to DHCP requests for option 150, or for
a list of TFTP servers that indicate to endpoints in the network
where to find Cisco Unified CM configuration files.
•
Click Specify to manually supply IP addresses of TFTP servers
in the interactive fields provided.
TFTP Server 1 through 5
Click Specify at Use Configuration TFTP Server to activate
interactive fields that are provided for entering TFTP server IP
addresses.
Cisco Unified Communications
Manager 1 through 5
Display-only report that shows the names of up to five
Cisco Unified Communications Managers.
