7-32
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-04
Chapter 7 Troubleshooting the CTS 1300
Managing Hardware Setup
Note
The red and green bars do not have to be exactly the same length, but get them as close as you can.
e.
Without moving the focus ring, tighten its thumbscrew.
Step 7
Click Done to complete the right camera focusing procedure.
Replacing the Camera Cover
To replace the camera cover, follow these steps:
Step 1
Place the foam lens covers onto the camera lenses, as shown in
Figure 7-27
.
Figure 7-27
Attaching the Foam Lens Covers to the Camera Lenses
Step 2
Replace the camera cover onto the camera cluster, then tighten the cover release screws to secure the
cover to the camera, as shown in
Figure 7-28
.
206351
7
