9-13
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-05
Chapter 9 Troubleshooting the CTS 3010 and CTS 3210
Managing Hardware Setup
Figure 9-7
Arranging the Small and Large Targets
Step 3
In the Cisco TelePresence Administrative GUI, click Setup, then click Show Focus Target.
Step 4
Adjust the small target so that the red box encloses the upper patterns on the large target and the green
box encloses the patterns on the small target.
Figure 9-8
Positioning the Small and Large Targets
Step 5
Adjust the focus on the camera by performing the following steps:
a.
Loosen the thumbscrew for the lens focus ring. The ring is labeled “N-8”.
207151
Large target
Small target
10 ft
5 ft
206146
Red
rectangle
Green
rectangle
Large
target
Small
target
Red and green
horizontal bars
