1-4
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-05
Chapter 1 Using the Cisco TelePresence System Administration Interface
System Status
Cisco Unified Communications Manager Status
The Cisco Unified Communications Manager can be in the following states:
•
OK
•
Inaccessible
In a Call Indicator
The Status box tracks when the meeting room is in a call and displays the security level of active calls.
When in a call, the security level is determined between the two endpoints. There are five possible levels
of levels of security.
•
Yes/Encrypted—Active call with both the signaling and the media encrypted.
•
Yes/Authenticated—Active call with encryption on the call signaling only.
•
Yes/Non-Secure—Active call with no authentication or encryption.
•
Yes/Not Available—Active call but the security level of that call is unavailable.
•
No—Not actively in a call.
•
Question Mark—Microphone is not expected or
microphone is not connected.
•
Red X with a broken pipe—Device in inaccessible. This
icon is seen if the primary codec cannot communicate with
a secondary codec.
•
Red X—Device is not connected or device is not
configured:
–
Cameras—When the video cable is not connected or is
loose, or when the Ethernet cable is not connected.
–
Displays—When the video cable is not connected or
the display does not have power.
–
Projectors—If the video cable is unplugged or the unit
does not have power.
–
Microphones—Offline.
–
If you have specified in Cisco Unified
Communications Manager (Cisco Unified CM) that a
projector/
LCD
is present and there is not one present.
