8-37
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-05
Chapter 8 Troubleshooting the CTS 3000 and CTS 3200
Managing Hardware Setup
Testing Other Devices
Use the Other Devices Tab to check the following additional devices:
•
Auxiliary Control Unit, page 8-37
•
Digital Media Player, page 8-37
•
Troubleshooting Other Devices, page 8-38
•
Related Information, page 8-39
Auxiliary Control Unit
The auxiliary control unit (
ACU
) controls the individual light units surrounding the displays in CTS
conference rooms and enables the CTS to get more complete projector status information and to restores
projector defaults.
To test the ACU, follow these steps:
Step 1
Log in to the Cisco TelePresence System Administration window.
Step 2
Choose Troubleshooting > Hardware Setup.
Step 3
Click the Other Devices radio button.
Step 4
Click Start in the Testing box. The Auxiliary Control Unit (Current Status) is displayed. Individual light
units correspond to the five port numbers of the Auxiliary Control Unit, Ports 1 through 5.
a.
Check a box to select a specific port number.
Or
b.
Click Select All to select all ports (and all light units) or Select None.
c.
Click the Refresh On/Off Status button to update the on/off status of each port.
d.
Click the Turn Selected Lights On/Off to test the selected light unit(s).
e.
Click the Reset Auxiliary Control Unit to power cycle the Auxiliary Control Unit.
Step 5
Click Stop to end the test.
Digital Media Player
The Digital Media Player (DMP) feature lets you select a secondary audio input source when you are
not in a TelePresence call.
To test the DMP, follow these steps:
Step 1
Log in to the Cisco TelePresence System Administration window.
Step 2
Choose Troubleshooting > Hardware Setup.
Step 3
Click the DMP tab.
Step 4
Click Start in the Testing box to begin testing the secondary audio input.
