7-55
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-04
Chapter 7 Troubleshooting the CTS 1300
Managing Hardware Setup
Step 6
Red targets appear on the display.
Step 7
Focus the center camera by completing the following steps:
a.
Loosen the focus ring thumbscrew on lens of the center camera.
b.
Rotate the focus ring until the black plus sign on the target is clearly in focus.
Note
The camera lens has two adjustment rings, one for focus and one for zoom. The focus ring is on
the inside.
Figure 7-51
Location of Focus and Zoom Ring
Focus ring
Zoom ring
206131
