3-11
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-05
Chapter 3 Configuring the Cisco TelePresence System
Address Book
Step 3
Click Apply to register new or modified settings.
Step 4
Click Reset to restore the original settings.
Note
All codecs on the system must be connected and enabled for the factory reset to complete. To register a
device, see the
“Optional Hardware”
section of the
Cisco Unified Communications Manager
Configuration Guide for the Cisco TelePresence System
.
Related Information
See the following documentation for more information about Cisco Unified CM:
•
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
•
Cisco Unified Communications Manager (CallManager) Documentation Roadmaps
Address Book
The Address Book window displays read-only entries that have been set during Cisco Unified CM
configuration. You can create listings for up to 40 meeting rooms.
To view the phone list of Cisco TelePresence system-enabled meeting rooms, follow these steps:
Step 1
Choose Configuration > Address Book.
Step 2
Use Cisco Unified CM to make changes to the Address Book. See the
Cisco Unified Communications
Manager Configuration Guide for the Cisco TelePresence System
.
Telephony Settings
The Telephony Settings window displays read-only information about the telephony settings for the
Cisco TelePresence System that were set in the Cisco Unified CM.
To view entries in the Telephony Settings window, follow these steps:
CAPF Authentication String
Enter the Certificate Authority Proxy Function authentication
string. The characters entered in this field must match the CAPF
Authentication string entered in Cisco Unified CM.
Certificate Trust List (CTL)
The Delete CTL button becomes active when the CTS is provided
with a CTL by a Cisco Unified CM configured in mixed
authentication mode.
Click Delete CTL to delete all entries on the CTL.
Table 3-2
Cisco Unified Communications Manager Settings
Field
Settings
