3-13
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-05
Chapter 3 Configuring the Cisco TelePresence System
SNMP Settings
Step 3
Use Cisco Unified CM to make changes to Telephony Settings. See the
Cisco Unified Communications
Manager Configuration Guide for the Cisco TelePresence System
.
SNMP Settings
The Simple Network Management Protocol (SNMP) Settings window displays read-only information
about the SNMP settings for the Cisco TelePresence System that were set in the Cisco Unified CM
configuration.
To view SNMP settings, follow these steps:
Step 1
Choose Configuration > SNMP Settings.
Step 2
View the SNMP settings described in
Table 3-4
:
Start Media Port
Must be in the range from 16384 to 32766, and must be lower than
the End Media Port settings.
End Media Port
Must be in the range from 16384 to 32766, and must be higher than
the Start Media Port settings.
Table 3-3
Telephony Settings (continued)
Field
Settings
Table 3-4
SNMP Settings
Field
Settings
Engine ID
Identifies the local or remote SNMP engine. The remote agent
SNMP engine ID and user password are used to compute
authentication and privacy digests.
