Canon MP980 series, On-Screen Manual

Page: 152 / 947

Advanced Guide
> Printing from a Computer >
Printing with the Bundled Application Software
> Printing Photos > Printing
Printing
1.
Click Layout/Print.
The Layout/Print screen appears.
Important
The thumbnails (reduced images) displayed in the screen may appear as follows:
- A black line appears along an edge of the image.
- An edge of the image appears cropped.
However, such images will be displayed normally when enlarged or previewed, and print
results will not be affected.
2.
Select a layout you want to use.
Click a borderless layout to print borderless photos.
Note
The layouts that can be selected may vary depending on the printer, paper size, and media
type.
3.
Click Print.
Important
When you print on large size paper such as A3/A3+, some computers cannot print properly if you
print more than one page or copy at a time. It is recommended that you print page by page when
you print on such paper.
While printing on paper larger than A4 or printing high-resolution images, data may be printed only
to the middle if many images are printed at one time. In such cases, select the Spool print job page
by page checkbox in the Preferences dialog box, and then print again.
To display the Preferences dialog box, click (Settings) or select Preferences... from the File
menu.
When Fine Art is selected for Paper Size, a 1.38 inch (35 mm) margin is automatically left at the top
and bottom of the paper.
It is recommended that you check the print range with the image shown in Preview before printing.
White streaks may appear at the top and bottom edges of grayscale photos printed in Letter, A4 or
8"x10" 20x25cm size. In that case, print with a 45 mm or more margin at the top and bottom edges.
If you select Bordered (Margin 45) from the layouts, images will be reduced to allow a 45 mm
margin at the top and bottom edges when printing.
Page 152 of 947 pages Printing