Chapter 1
1-80
[Refernce] The optional Envelope Feeder Attachment is required to load envelopes, depending on the type of envelope.
- Paper Drawer: The Envelope Feeder Attachment-F1 is required, except when using ISO-C5 or Kakugata 2.
- POD Deck Lite-B1: The Envelope Feeder Attachment-G1 is required. 10" x 13" and some types of Yougatanaga 3 can be used without the Envelope Feeder At-
tachment-G1, depending on the manufacturer.
1.1.7.1.16 How to load envelopes when picking up from paper drawer
0031-5486
[ Manual-related ]
Description
Please explain how to load envelopes when picking up from a paper drawer.
Field Remedy
1) Place the envelopes on a clean, level surface, and press all the way around the envelopes by hand, in the direction of the arrows, to remove any curls. Repeat this
step five times for each set of five envelopes.
Load paper you want to use as a cover of a booklet in the document insertion unit, such as coated paper.
[ Paper Capacity ] Upper and Lower trays: 200 sheets (20 lb bond (80 g/m2)) each Paper Type Thin 1 to 2, Plain 1 to 2, Heavy 1 to 6, Color, Recycled, Pre-Punched, Tab,
Bond, Letterhead, Coated, Textured, and Vellum
[ Paper Size ] 13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, and Custom Size (7 1/8" x 7 1/8" to 13" x 19 1/4" (182 mm x 182 mm to
330.2 mm x 487.7 mm))
Stack Bypass-B1 (Option)
[ Paper Capacity ] 100 sheets (20 lb bond (80 g/m2))
[ Paper Type ] Thin 1 to 2, Plain 1 to 2, Heavy 1 to 6, Color, Recycled, Pre-punched, Transparency, Labels, Tab, Bond, Letterhead, Coated, Textured, Vellum, and
Envelopes
[ Paper Size ] 13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (4" x 5 7/8" to 13" x 19 1/4" (100 mm x 148 mm to
330.2 mm x 487.7 mm)), and Envelopes
POD Deck Lite-B1 (Option)
[ Paper Capacity ] 3,500 sheets (20 lb bond (80 g/m2))
[ Paper Type ] Thin 1 to 2, Plain 1 to 2, Heavy 1 to 6, Color, Recycled, Pre-Punched, Transparency, Labels, Tab, Bond, Letterhead, Coated, Textured, Vellum, and
Envelopes
[ Paper Size ] 13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (4" x 5 7/8" to 13" x 19 1/4" (100 mm x 148 mm to
330.2 mm x 487.7 mm)), and Envelopes
Summary of Contents for imagePRESS C800 Series
