Canon imagePRESS C800 Series, Troubleshooting Manual

Page: 126 / 256

Chapter 1
1-112
Hardware Specifications and Software Specifications of the Network Environmentfor are as follows.
Field Remedy
Hardware Specifications
Software Specifications
1.1.7.1.30 Location of Power Switch and how to check Breaker
0031-5620
[ Manual-related ]
Description
Refer to information below for the location of Power Switch and how to check the Breaker.
Field Remedy
a) Location and name of Power Switch
The Environment Heater Switch is the switch that supplies or shuts power to the Drum Heater, Cassette Heater and Reader Heater.
[Caution]
- Do not turn off the Main Power Switch while the progress bar is displayed at power-on due to the machine accessing the HDD.
- Turn off the Main Power Switch to turn off the power (The conventional shutdown sequence process is not needed).
- After turning off the Main Power Switch, do not turn on the Main Power Switch again until the screen turns blank.
- Do not turn off the Main Power Switch when executing a download.
b) How to check the Breaker
1) Turn off the Main Power Switch and check that the LED on the Control Panel is turned off.
2) Press the test button on the Breaker which is located at the rear of machine with a ballpoint pen or other pointed object.
3) Check that the Breaker Switch leans toward off (O side).
4) Set the Breaker Switch to on (I side).
5) Turn the Main Power Switch ON.
1.1.7.1.31 Number of registered mail box
0031-5625
[ Manual-related ]
Description
Please explain the number of registered mail box.
[Reference] The mail box is a data storage location in the machine that stores and handles files for printing in a format exclusively supported by this machine.
It enables users to store files that are scanned with this machine, or data sent from a personal computer via the printer driver.
You can print the stored document whenever necessary using the desired settings. Also, you can convert the file format of documents to another format, such as
Item Specifications
Network Interface 10Base-T/100Base-TX/1000Base-T (RJ-45)
Protocol Supported
TCP/IP
Frame type : Ethernet II
Print applications: LPD/Raw/IPP/IPPS/FTP/WSD/SMB
IPX/SPX
Frame type: Ethernet II/Ethernet 802.2/Ethernet 802.3/Ethernet SNAP/Auto Detect
Print applications: Bindery PServer/NDS PServer/RPrinter/Nprinter
AppleTalk
Frame type: Ethernet SNAP
Print applications: PAP (Printer Access Protocol)