Canon imagePRESS C800 Series, Troubleshooting Manual

Page: 253 / 256

Chapter 1
1-239
1) Press "Settings/Registration".
2) Press "Function Settings" > "Send" > "Common Settings".
3) Press "Communication Management Report".
4) Specify each setting > press "Off".
1.1.7.3 FAQ on LIPS Specifications
1.1.7.3.1 Software Specifications (Printer Settings)
0031-5575
[ Manual-related ]
Description
Software Specifications of the Printer Settings are as follows.
Description
Software Specifications
1.1.7.4 FAQ on G3FAX Specifications
1.1.7.4.1 Number of registered Sender Name (TTI)
0031-5622
[ Manual-related ]
Description
Please explain the maximum number of registered Sender Name (TTI).
[Reference] The registered Sender Name can be displayed on the touch panel display of the receiving party's machine and/or printed at the top of the documents
that you send as the sender's information.
Field Remedy
The maximum number of registered Sender Name is 99 names.
(Number of input characters: Up to 24 one-byte characters or 12 two-byte characters)
[Reference]
- You can register the Sender Name to display instead of the unit's name from "Register Sender Name (TTI)".
- The name registered in Register Unit Name is displayed for "00" in the Sender Name list.
- Steps to register a Sender Name (TTI)
Settings/Registration > Function Settings > Send > Fax Settings > Register Sender Name (TTI)
- Steps to select a registered Sender Name
Fax > Specify the destination > Options > Sender Name (TTI) > Select the sender name to use > OK > Close
1.1.7.4.2 How to avoid printing Fax TX Report
0031-6632
[ Inspected by Canon Inc. ]
Description
Please explain how to avoid printing Fax TX Report.
Field Remedy
The Fax TX Report enables you to check whether documents were sent correctly to their intended destinations. A Fax TX Report can be printed automatically after
the documents are sent. You can also set the machine to print a Fax TX Report only when a transmission error occurs, and adjust the Fax TX Report setting to print
the first part of the document as part of the report to remind you of the document's contents.
For information on the optional products required to use this function.
[Reference]
Reports can be printed only if 11" x 17", LGL, LTR, or LTRR (plain, recycled, thin, or color) is loaded in a paper source whose settings in "Other" in "Paper Drawer
Auto Selection On/Off" in "Function Settings" ("Settings/Registration") are set to "On". However, if "Consider Paper Type" for "Copy" is set to "On" in "Paper
Drawer Auto Selection On/Off", you cannot print from a paper source with color paper specified.
1) Press "Settings/Registration".
2) Press "Function Settings" > "Send" > "Fax Settings".
3) Press "Fax TX Report".
4) Select "Off" if you do not want to print it.
Item Specifications
Command Language PCL5e, PCL6, PostScript 3
Resident Fonts
PCL: 93 Scalable fonts, 2 OCR fonts, and 10 Bitmap fonts
PS: 136 Scalable fonts
Printable Area
PCL5e, PCL6:
Reduced to 4,23mm (1/6") from the top, bottom, left, and right edges of the paper.
PostScript 3*:
Reduced to 4mm (1/6") from the top, bottom, left, and right edges of the paper.
* With 320mm x 450mm (12 5/8" x 17 11/16") size paper, you cannot print in the areas 10mm (3/
8") from the top, bottom, left, and right edges of the paper.