Canon imagePRESS C800 Series, Troubleshooting Manual

Page: 65 / 256

Chapter 1
1-51
- No: A job for the pages scanned into memory is canceled. Scan the whole pages again.
[Reference]
Delete the unnecessary files stored in the Mail Box and Fax/I-Fax Inbox in the case of frequent display of memory full.
1.1.3.4 Other Defect
1.1.3.4.1 Saddle stitch position of the paper are not exactly in the middle of the booklet / Folds of the paper are not exactly
in the middle of the booklet (Saddle Finisher -AM2)
0031-5507
[ Manual-related ]
Description
If you are using the Saddle Stitch mode of the Saddle Finisher-AM2, and you notice that the folds of the paper are not exactly in the middle of the booklet or the
saddle stitch position of the paper are not exactly in the middle of the booklet, you can make adjustments to the saddle stitch fold placement or saddle stitch position
to compensate for this error.
[Caution]
- If you want to adjust both the stitch position and the fold placement, adjust the stitch position first, and then adjust the fold placement. To adjust the fold placement,
see "Saddle Stitch Fold Placement Adjustment."
- If both the stitch position and the fold placement are in the center of the paper after adjusting the stitch position, the adjustment of the fold placement is not nec-
essary.
Field Remedy
a) Change Fold/Stitch Position
1) Press Settings/Registration > Adjustment/Maintenance > Adjust Action > "Change Fold/Stitch Position".
2) Select the paper size to change > adjust the saddle stitch position by pressing up or down arrow key > press OK.
b) Adjust Saddle Stitch Fold Position
1) Press Settings/Registration > Adjustment/Maintenance > Adjust Action > "Adjust Saddle Stitch Fold Position".
2) Select the paper size to change > adjust the saddle stitch fold placement by pressing up or down arrow key > press OK.
1.1.3.4.2 How to clear a staple jam which occures in staple unit (Finisher-AM1/Saddle Finisher-AM2)
0031-5513
[ Manual-related ]
Description
If a staple jam occurs, the location of a staple jam and procedures for
clearing the jam are displayed.
If you press [Close], you can continue operations, such as scanning originals, even if the jammed paper is not removed.
[Caution]
Take care when handling the optional equipment that is attached to the machine. When an optional unit's cover is opened to replace a staple cartridge, discard the
punch waste, discard the trim waste, discard the staple waste, or clear paper or staple jams, prints may still be output if other optional units are operating normally,
and are not involved in the paper or staple jam removal procedure.
Field Remedy
1) Remove the paper waiting to be stapled from the delivery tray.