Chapter 1
1-70
1.1.7.1.2 Specifications for POD Deck Lite-B1
0031-5163
[ Manual-related ]
Description
Specifications for the POD Deck Lite-B1 are as follows.
Field Remedy
POD Deck Lite-B1
T-1-2
* Including the POD Deck Lite Attachment Kit-A1.
1.1.7.1.3 Specifications for Multi-drawer Paper Deck-B1
0031-5164
[ Manual-related ]
Description
Specifications for the Multi-drawer Paper Deck-B1 are as follows.
Field Remedy
Original Scanning Speed
Copying:
1-sided scanning:
120 sheets/minute*1 (LTR in Black-and-White at 600 dpi)
70 sheets/minute (LTR in Full Color at 600 dpi)
2-sided scanning:
60 sheets/minute (120 pages)*1 (LTR in Black-and-White at 600 dpi)
35 sheets/minute (70 pages) (LTR in Full Color at 600 dpi)
Scanning:
1-sided scanning:
120 sheets/minute (LTR in Black-and-White/Full Color at 300 dpi)
2-sided scanning:
100 sheets/minute (200 pages)*1 (LTR in Black-and-White at 300 dpi)
70 sheets/minute (140 pages) (LTR in Full Color at 300 dpi)
*1 When "Speed Priority" is selected.
* The scanning speed may vary, depending on the scanning mode and original type.
Power Source
From the main unit
Dimensions (H x W x D)
7 1/8" x 24 7/8" x 23 3/4" (179 mm x 633 mm x 603 mm) (feeder and reader)
Weight
Approximately 59.3 lb (26.9 kg) (feeder and reader)
Item
Specifications
Paper Size / Weight / Type
Size:
13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (4" x 5 7/8" to 13" x 19
1/4" (100 mm x 148 mm to 330.2 mm x 487.7 mm))*1, and Envelopes*2*3
*1 Custom paper sizes which are smaller than 5 1/2" x 7 1/8" (139.7 mm x 182 mm) can be used only if they are standard paper
sizes.
*2 The following envelope types can be used:
Standard Paper Size : Nagagata 3, Yougatanaga 3, Kakugata 2, No. 10(COM10), ISO-C5, DL, and Monarch
Custom Paper Size : 6" x 9", 9" x 12", and 10" x 13"
*3 10" x 13" can be used without the Envelope Feeder Attachment-G1
Weight:
14 lb bond to 110 lb cover (52 g/m2 to 300 g/m2)
Type:
Thin 2 (14 lb bond to 16 lb bond (52 g/m2 to 63 g/m2)), Thin 1 (17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2)), Plain 1 (20 lb
bond to 24 lb bond (80 g/m2 to 90 g/m2)), Plain 2 (25 lb bond to 28 lb bond (91 g/m2 to 105 g/m2)), Heavy1 (29 lb bond to 34
lb bond (106 g/m2 to 128 g/m2)), Heavy 2 (35 lb bond to 40 lb bond (129 g/m2 to 150 g/m2)),Heavy 3 (40 lb bond to 66 lb cover
(151 g/m2 to 180 g/m2)), Heavy 4 (67 lb cover to 80lb cover (181 g/m2 to 220 g/m2)), Heavy 5 (82 lb cover to 140 lb index (221
g/m2 to 256g/m2)), Heavy 6 (140 lb index to 110 lb cover (257 g/m2 to 300 g/m2)), Color, Recycled, Pre-Punched, Transparency,
Labels, Tab, Bond, Letterhead, Coated, Textured, Vellum, and Envelopes
Paper Deck Capacity
3,500 sheets (20 lb bond (80 g/mm))
Power Source / Maximum Power
Consumption
120-127 V AC, 60 Hz, 2.2 A/480 W or less
Dimensions (H x W x D)*
22 3/8" x 28 1/4" x 27" (568 mm x 717 mm x 686 mm)
Weight*
168 lb (76 kg)
Installation Space Including the
Main Unit
(W x D)*
80 5/8" x 36 3/4" (2,049 mm x 934 mm)
(When the Output Tray-A1, the Duplex Color Image Reader Unit-H1 and the Upright Control Panel-D1 are attached)
Summary of Contents for imagePRESS C800 Series
