Chapter 1
1-71
Multi-drawer Paper Deck-B1
T-1-3
1.1.7.1.4 Specifications for Stack Bypass-B1
0031-5165
[ Manual-related ]
Description
Specifications for the Stack Bypass-B1 are as follows.
Field Remedy
Stack Bypass-B1
T-1-4
1.1.7.1.5 Specifications for Stack Bypass Alignment Tray-C1
0031-5166
[ Manual-related ]
Description
Specifications for the Stack Bypass Alignment Tray-C1 are as follows.
Item
Specifications
Paper Size / Weight /
Type
Size:
13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, STMTR, and Custom Size (5 1/2" x 7 1/8" to 13" x 19 1/4"
(139.7 mm x 182 mm to 330.2 mm x 487.7 mm))
Weight:
14 lb bond to 110 lb cover (52 g/m2 to 300 g/m2)
Type:
Thin 2 (14 lb bond to 16 lb bond (52 g/m2 to 63 g/m2)), Thin 1 (17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2)), Plain 1 (20 lb bond to 24 lb
bond (80 g/m2 to 90 g/m2)), Plain 2 (25 lb bond to 28 lb bond (91 g/m2 to 105 g/m2)), Heavy1 (29 lb bond to 34 lb bond (106 g/m2 to 128
g/m2)), Heavy 2 (35 lb bond to 40 lb bond (129 g/m2 to 150 g/m2)), Heavy 3 (40 lb bond to 66 lb cover (151 g/m2 to 180 g/m2)), Heavy 4
(67 lb cover to 80 lb cover (181 g/m2 to 220 g/m2)), Heavy 5 (82 lb cover to 140 lb index (221 g/m2 to 256 g/m2)), Heavy 6 (140 lb index
to 110 lb cover (257 g/m2 to 300 g/m2)), Color, Recycled, Pre-Punched, Transparency, Labels, Tab, Bond, Letterhead, Coated, Textured, and
Vellum
Paper Deck Capacity 2,000 sheets x 3 paper decks (20 lb bond (80 g/mm))
Power Source/
Maximum Power
Consumption
120-127 V AC, 60 Hz, 3.1 A/880 W or less
Dimensions (H x W x
D)
41" x 37 3/8" x 31 3/8" (1,040 mm x 950 mm x 797 mm)
Weight
Approximately 342 lb (155 kg)
Installation Space
Including the Main
Unit
(W x D)
89 7/8" x 36 3/4" (2,282 mm x 934 mm)
(when the Output Tray-A1, the Duplex Color Image Reader Unit-H1 and the Upright Control Panel-D1 are attached)
Item
Specifications
Paper Size / Weight / Type
Size:
13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (4" x 5 7/8" to 13" x 19 1/
4" (100 mm x 148 mm to 330.2 mm x 487.7 mm)), and Envelopes*
* The following envelope types can be used:
Standard Paper Size: Nagagata 3, Yougatanaga 3, Kakugata 2, No. 10(COM10), ISO-C5, DL, and Monarch Custom Paper Size: 6"
x 9", 9" x 12", and 10" x 13"
Weight:
14 lb bond to 110 lb cover (52 g/m2 to 300 g/m2)
Type:
Thin 2 (14 lb bond to 16 lb bond (52 g/m2 to 63 g/m2)), Thin 1 (17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2)), Plain 1 (20 lb
bond to 24 lb bond (80 g/m2 to 90 g/m2)), Plain 2 (25 lb bond to 28 lb bond (91 g/m2 to 105 g/m2)), Heavy1 (29 lb bond to 34 lb
bond (106 g/m2 to 128 g/m2)), Heavy 2 (35 lb bond to 40 lb bond (129 g/m2 to 150 g/m2)), Heavy 3 (40 lb bond to 66 lb cover
(151 g/m2 to 180 g/m2)), Heavy 4 (67 lb cover to 80 lb cover (181 g/m2 to 220 g/m2)), Heavy 5 (82 lb cover to 140 lb index (221
g/m2 to 256 g/m2)), Heavy 6 (140 lb index to 110 lb cover (257 g/m2 to 300 g/m2)), Color, Recycled, Pre-punched, Transparency,
Labels, Tab, Bond, Letterhead, Coated, Textured, Vellum, and Envelopes
Paper Capacity
100 sheets (20 lb bond (80 g/m2))
Summary of Contents for imagePRESS C800 Series
