manualshive.com logo in svg

Cadillac Escalade 2020, Owner'S Manual

The Cadillac Escalade 2020 Owner's Manual is now available for download, absolutely free! This comprehensive manual is a must-have for every Escalade owner, providing essential information and guidance. Visit manualshive.com now to access and download your manual instantly, ensuring a seamless ownership experience.

Share
Download
background image

Cadillac Escalade Owner Manual (GMNA-Localizing-MidEast-13566599) -

2020 - CRC - 5/29/19

SEATS AND RESTRAINTS

49

The buttons are on the rear of the
center console.

With the engine running, press

M

or

L

to heat the left or right outboard

seat cushion. An indicator on the rear
climate control display appears when
this feature is on.

Press the button once for the highest
setting. With each press of the button,
the seat will change to the next lower
setting, and then to the off setting.
The indicator lights next to the
buttons indicate three for the highest
setting and one for the lowest.

If the heated seats are on high for an
extended time, their level may
automatically be lowered.

Second Row Seats

The second row seats can be folded
for additional cargo space or folded
and tumbled for easy entry and exit to
the third row seat.

Reclining Seatbacks

To recline the seatback:

1. Lift the lever on the outboard

side of the seat.

2. Move the seatback to the desired

position, and then release the
lever to lock the seatback in
place.

3. Push and pull on the seatback to

make sure it is locked.

To return the seatback to the upright
position:

{

Warning

If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.

1. Lift the lever fully while applying

pressure to the seatback, and the
seatback will return to the
upright position. If the lever is
lifted without applying pressure,
the seat will release to a folded
position.

2. Push and pull on the seatback to

make sure it is locked.

Summary of Contents for Escalade 2020




































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade 2020

VEAP SHIELD UNITED FT Series Mounting Instruction preview
FT Series
Brand: VEAP SHIELD UNITED Pages: 3
Garmin BC 30 Owner'S Manual preview
BC 30
Brand: Garmin Pages: 2
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
Warrior Products 10936 Installation Instructions preview
10936
Brand: Warrior Products Pages: 3
GATmatic TWC-562S Installation, Operation & Maintenance Manual preview
TWC-562S
Brand: GATmatic Pages: 13
RAM Ram Dodge 2010 Owner'S Manual preview
Ram Dodge 2010
Brand: RAM Pages: 616
Nav TV AUDI-P60H Install Manual preview
AUDI-P60H
Brand: Nav TV Pages: 9
Honda Clarity 2018 Owner'S Manual preview
Clarity 2018
Brand: Honda Pages: 81
Thule Kit 2161 Fitting Instructions preview
Kit 2161
Brand: Thule Pages: 2
PAC Stinger ELEV8 Install Manual preview
Stinger ELEV8
Brand: PAC Pages: 14
Kolpin 98310 Product Instructions preview
98310
Brand: Kolpin Pages: 3
mtf TRANSPORT SYSTEM BackPower Manual preview
BackPower
Brand: mtf TRANSPORT SYSTEM Pages: 9
Westfalia 305 158 Mounting Instructions preview
305 158
Brand: Westfalia Pages: 10
Magneti Marelli 350203061230 Installation Instruction preview
350203061230
Brand: Magneti Marelli Pages: 2
PEUGEOT 108 2017 Vehicle Instruction Card preview
108 2017
Brand: PEUGEOT Pages: 17
Volvo XC70 - ANNEXE 808 Quick Manual preview
XC70 - ANNEXE 808
Brand: Volvo Pages: 8
Hyundai Sonata 2011 Owner'S Manual preview
Sonata 2011
Brand: Hyundai Pages: 380

Brands by name

Popular brands

Load more brands